 CAN USB Adapter - Light $99.95
DESCRIPTION:
In command mode any USB/PC device puts CAN messages directly onto a CAN network. The CAN USB Light adapter is great for application programmers that need a 125K, 250K, or 500K baud adapter for CAN. A simple USB driver (included) and your simple application software is all the software required.
In virtual mode, just put 2 CAN/USB devices on each end of the network and you are using the CANbus network as the backbone for your network.
Peak CAN Software and LabView drivers are NOT compatible with the CAN USB Light Adapter. If you want these capabilities then the CAN USB Performance Adapter is what you need.
FEATURES:
CAN 2.0A (11-bit ID standard) and/or 2.0B (29-bit ID extended)
CANbus baud rates 125K, 250K, 500K
CIA DS-102 pinout (H=7, L=2, GND=3)
Serial pinout: TX=2, RX=3, GND=5
10 message transmit buffer, 2 message receive buffer
LEDs for USB TX and RX, CAN TX and RX
Power by USB, USB cable included
Command Mode:
Virtual Circuit Mode:
DOCUMENTATION:
USB CAN Light User Manual
 For Volume Pricing.
|
